Dang blasted S-1 canopy, every time I pull more than 4G's or so it
pops open and slides back to the second set of notches.... very disconcerting.
I've tried deepening the notch grooves a bit, and I've tried adding some
sealing tape to push it down a bit more but it still does it... seems
only to happen in the cold i.e. -4C or so, was fine all summer.

Anybody else had this problem ... anybody got any suggestions
besides flying down to florida ;)

Cheers,

Peter
--

View index by [date] [author] [subject]
Previous message: Re: 4 in 1 Exhaust system performance, B. Jensen
Next message: Re: Removing N-numbers again!, jerry deanda
Next message in thread: Re: Pitts S-1 style sliding canopy irritations..., Guido Lepore