|
|
[index]
[month]
[prev]
[next]
[thead-prev]
[thread-next]
Subject: Re: No ADF in plane IFR training
From: Richard Kaplan
Date: Sun Mar 17 06:06:40 2002
| |
|
"Henry A. Spellman" <hank@abelink.com> wrote in message
news:<3C940E5E.374BDD3F@abelink.com>...
> right or left. But for flying an approach, there is an even easier method.
> By using the 45 degree indices on both the directional gyro and the ADF
If your ADF has a rotating card, this can be made even
easier. Just set the top of the ADF card to read the
same heading as your DG; then the ADF needle points to
the bearing TO the NDB and the ADF tail points
to the bearing FROM the NDB.
--
Richard Kaplan, CFII
rkaplan@umrpc.com
www.umrpc.com/p210
View index by [date] [author] [subject]
Previous message: Re: CFR FAR Part 135.26(b), Curtis Suter
Next message: Re: Instrument Checkride PASSED, JerryK
Next message in thread: Re: No ADF in plane IFR training, Rich Hare
Previous message in thread: Re: No ADF in plane IFR training, Henry A. Spellman
|